Skip to main content
Updated 7 min min read

Stanley/Stella Size Guide: Creator, Rocker and Sparker Fit vs Bella+Canvas and Comfort Colors

Stanley/Stella size chart in inches: Creator 2.0, Rocker and Sparker 2.0 measured size by size, and how their fits compare with Bella+Canvas 3001 and 1717.

344 reviews on Google and Yelp, rated 4.9Trusted by Disney, Google, Spotify and UFC (562) 407-3800

Share

A Stanley/Stella Creator 2.0 in size M measures 21 in across the chest laid flat (about 42 in around) and 29 1/4 in long. The Rocker is within 1/4 in of it at every size, and the relaxed-fit Sparker 2.0 is about 3/4 in wider across the chest. Stanley/Stella publishes these measurements for every size.

We are an official Stanley/Stella dealer in Santa Fe Springs, serving Los Angeles and Orange County. Every style is on our Stanley/Stella size charts page. Get an exact price for your quantity and print in our quote calculator.

Does Stanley/Stella run small?

Stanley/Stella's product data does not describe its tees as running small or large. It publishes garment measurements instead. The Creator 2.0 is a medium fit with a 21 in half chest in M, about 53 cm. The fair test is to lay a shirt you like flat, measure armpit to armpit, and match that number on the chart.

Double the half chest for the full chest. On the Creator 2.0 the half chest grows 3/4 in per size at the small end and 1 1/2 to 2 in per size from S upward, so the step between sizes gets bigger as you go up the run.

How do the Creator 2.0, Rocker and Sparker 2.0 compare?

All three are unisex tees in 100% organic cotton. The Creator 2.0 and Rocker are medium fit, and the Sparker 2.0 is a heavier relaxed fit. They differ more in fabric than in cut: the Rocker is the lightest and tubular, the Sparker the heaviest and loosest knit.

SpecCreator 2.0 (SATU001)Rocker (SATU016)Sparker 2.0 (SATU017)
FitMedium fitMedium fitRelaxed fit
Weight5.3 oz/yd² (180 g/m²)4.4 oz/yd² (149 g/m²)6.3 oz/yd² (214 g/m²)
Fabric100% organic ring spun combed cotton, 24 singles100% organic ring spun combed cotton, 28 singles100% organic carded cotton, 16 singles, loose knit
BuildSide-seamedTubular, no side seamsSide-seamed, pre-shrunk
FinishFabric washedFabric washedPanel washed
SizesXXS to 5XLXXS to 5XLXXS to 3XL
Colors52522

Specs are from the Stanley/Stella product API.

What are the measurements size by size?

The Creator 2.0 and Rocker are near twins on the chart. The Sparker 2.0 is 3/4 in wider across the chest in every size except XL, where it is 1 in wider, and 1/4 to 1/2 in longer. Figures are in inches, laid flat.

SizeCreator 2.0 half chestCreator 2.0 lengthRocker half chestRocker lengthSparker 2.0 half chestSparker 2.0 length
XXS1826 3/41826 1/218 3/427 1/4
XS18 3/427 1/21927 1/419 1/228
S19 1/228 1/419 3/42820 1/428 3/4
M2129 1/421 1/429 1/421 3/429 1/2
L22 3/43022 3/43023 1/230 1/4
XL24 1/23124 3/43125 1/231 1/2
2XL26 1/23226 3/43227 1/432 1/2
3XL28 1/23328 3/43329 1/433 1/2
4XL30 1/233 3/430 3/433 3/4Not offeredNot offered
5XL32 1/234 3/432 3/434 3/4Not offeredNot offered

Measurements are from the Stanley/Stella product API. Each style's full chart, including sleeve length and centimeters, is on its own page: Creator 2.0, Rocker and Sparker 2.0.

What does relaxed fit mean in numbers?

On these charts, relaxed fit means a little more room, not a size up. In M, the Sparker 2.0 is 1 1/2 in more around the chest than the Creator 2.0 (21 3/4 in against 21 in, laid flat). A full size step on the Creator 2.0 from M to L is 1 3/4 in laid flat, so the Sparker sits between the two.

Is the Rocker the same fit as the Creator 2.0?

Almost. Its body is within 1/4 in of the Creator 2.0 at every size, and it is a lighter 4.4 oz tee with tubular construction. Its sleeves are shorter: in M, Stanley/Stella lists 8 1/4 in against 9 1/2 in on the Creator 2.0.

How does Creator 2.0 sizing compare with Bella+Canvas 3001 and Comfort Colors 1717?

We do not have published measurements for the 3001 or 1717 in our supplier data, so we compare fit names and size ranges only. The 3001 is a retail fit in XS to 5XL, and the 1717 a relaxed fit in S to 4XL. Check each brand's chart before you swap one for another.

ShirtFit, as listedSizesWeight
Stanley/Stella Creator 2.0Medium fit, unisexXXS to 5XL5.3 oz/yd²
Stanley/Stella Sparker 2.0Relaxed fit, unisexXXS to 3XL6.3 oz/yd²
Bella+Canvas 3001Retail fit, unisex sizingXS to 5XL4.2 oz/yd²
Comfort Colors 1717Relaxed fitS to 4XL6.1 oz/yd²

Stanley/Stella specs are from the Stanley/Stella product API. Bella+Canvas 3001 and Comfort Colors 1717 specs are from the S&S Activewear catalog description.

A few practical points:

  • Coming from a 3001? Our earlier comparison found the 3001 sits a little closer to the body, so measure a 3001 you own and compare it with the Creator 2.0 chart. Our Creator 2.0 vs Bella+Canvas 3001 guide covers fabric and print.
  • Coming from a 1717? Both the 1717 and the Sparker 2.0 are sold as relaxed fits and are heavier tees. The S&S description says the 1717 is garment dyed with minimal shrinkage, and Stanley/Stella lists the Sparker 2.0 as pre-shrunk. See Creator 2.0 vs Comfort Colors 1717.

How do you choose sizes for a group order?

Measure, do not guess. Lay one shirt that fits well flat, measure armpit to armpit and the body length, then match both numbers to the chart. For a team or staff order, a quick sizing poll of the group beats rounding every size up.

  • Mix sizes freely. All sizes of one design count toward the same minimum, which is 36 pieces for screen printing.
  • Watch the top end. The Sparker 2.0 stops at 3XL, while the Creator 2.0 and Rocker run to 5XL.
  • Care keeps the fit. Stanley/Stella's care data for all three: wash cold at 86°F, do not bleach, tumble dry low.

Our take

As an official Stanley/Stella dealer, we like that the brand publishes a full chart for every style, so sizing becomes a measuring job rather than a guess. For most premium tee orders the Creator 2.0 is our starting point, with an XXS to 5XL size run and 52 colors. When a group wants a lighter tee with the same body, we point to the Rocker, and for a roomier, heavier feel, the Sparker 2.0. See every style on our Stanley/Stella hub or on Stanley/Stella's Creator 2.0 page.

Ordering from Los Angeles or Orange County

  • Where we are. 14130 Rosecrans Ave, Santa Fe Springs, CA 90670, serving Los Angeles and Orange County.
  • Minimums. DTG none, DTF 12, embroidery 24, screen printing 36 pieces per design.
  • Timing. About 2-3 weeks after art approval. Rush available depending on the schedule. Tell us your date.
  • Contact. Mon-Fri 8am-4pm PT, (562) 407-3800, sales@frenchpresscustom.com.

Price the Creator 2.0 now.

Frequently asked questions

Does Stanley/Stella run small?

Stanley/Stella's product data does not describe its tees as running small. The Creator 2.0 is a medium fit, and size M measures 21 in across the chest laid flat, about 42 in around. Compare that with a shirt you already wear.

What is the Creator 2.0 size chart?

In inches, laid flat: S is 19 1/2 half chest and 28 1/4 long, M is 21 and 29 1/4, L is 22 3/4 and 30, and XL is 24 1/2 and 31. It runs from XXS to 5XL.

Is Creator 2.0 sizing the same as Bella+Canvas 3001?

Not necessarily. The Creator 2.0 is listed as a medium fit and the 3001 as a retail fit. We do not have 3001 measurements in our supplier data, so check the Bella+Canvas chart against the Creator 2.0 chart.

Is the Sparker 2.0 bigger than the Creator 2.0?

Slightly. It is a relaxed fit, about 3/4 in wider across the chest laid flat in most sizes and 1/4 to 1/2 in longer. It runs from XXS to 3XL.

Who prints Stanley/Stella tees in Los Angeles and Orange County?

French Press Custom in Santa Fe Springs is an official Stanley/Stella dealer. We print the full range for customers across Los Angeles and Orange County, with standard turnaround of about 2-3 weeks after art approval.

Everything here is decorated in-house in Santa Fe Springs. Pick a method to see the service page and its live pricing guide.

Ordering with us

  • Free digital proof on every order; production starts only after your written approval.
  • Backed by our quality guarantee.
  • Screen Printing: from 36 pieces, ready about 2-3 weeks after art approval
  • DTG Printing: no minimum, ready about 2-3 weeks after art approval
  • DTF Transfers: from 12 pieces, ready about 2-3 weeks after art approval
  • Embroidery: from 24 pieces, ready about 2-3 weeks after art approval
  • Pickup in Santa Fe Springs (Mon-Fri 8am-4pm PT) or shipping nationwide.
  • Rush available depending on the schedule. Tell us your date in your quote request.

Instant Pricing

Get your real price in 60 seconds

Configure your order - screen printing, embroidery, DTG, DTF & more - and see live per-piece pricing. No email required to see prices.

Get My Instant Quote

Prefer to talk it through? (562) 407-3800 sales@frenchpresscustom.com

Need Custom Printing?

Get a free quote for your next project. DTG from 1 piece, screen printing from 36, embroidery from 24.

Get a Free Quote
Call (562) 407-3800Open Mon-Fri 8-4Get a Quote