Skip to main content
Updated 8 min min read

How Screen Printing Works, Step by Step

How screen printing works: art, separations, films, emulsion screens, registration, underbase and a 320°F cure. 100 shirts from $7.86 each.

344 reviews on Google and Yelp, rated 4.9Trusted by Disney, Google, Spotify and UFC (562) 407-3800

We offer this service:Screen Printing|pricing guide

Share

Screen printing pushes ink through a mesh stencil onto a shirt, one screen for every ink color. At French Press Custom in Santa Fe Springs, every job follows the same path: art review, color separations, one film per color, emulsion screens, press setup and registration, printing with a white underbase on dark shirts, and a full cure in a conveyor dryer at 320°F.

That is the short version. Below is what actually happens at each step, what you need to do as the customer, and why each step shows up in the price. If you want to compare methods before you commit, our screen printing vs DTG page covers when a digital print is the better fit.

Screen printing at a glance

StepWhat happensWhat you doWhat goes wrong if it is skipped
1. Art reviewWe check the file, size and colorsSend the best file you haveBlurry edges, wrong size on the shirt
2. Color separationsEach ink color becomes its own layerConfirm ink colors on the proofColors bleed into each other
3. FilmsEach layer is output as a film positiveNothingNo stencil to burn
4. Emulsion screensA coated mesh screen is exposed through the filmNothingFuzzy or broken detail
5. Press setup and registrationScreens are locked on the press and alignedApprove the proof in writingColors land out of line
6. PrintingInk is pulled through each screen in orderNothingDull color on dark shirts without an underbase
7. CuringShirts run through a conveyor dryerNothingCracking and fading after a few washes
8. Inspection and packingCounted, checked, folded, sorted by sizePick up or receive the shipmentMissing sizes at handout

Live price

What will my order cost?

Quantity

Ink colors

Garment

Pricing your order...

Step 1: How should my artwork be prepared?

Vector files (AI, EPS, PDF) are the easiest to work from, because the edges stay sharp at any size. A high-resolution PNG can work too. Our team reviews the file, sets the print size, and flags anything that will not hold up in ink, like hairline strokes or tiny text. Our artwork check and the guide to preparing artwork for screen printing cover file types in detail.

Step 2: What are color separations?

A screen can only print one color, so the design is split into one layer per ink. A three-color logo becomes three layers: say, red, gold and black. Each layer is pure black and white, because it will become a stencil.

There are two common ways to separate art:

Separation typeHow it worksBest for
Spot colorEach solid color gets its own screen, mixed to match your colorLogos, text, bold graphics
Simulated processA handful of spot inks printed as halftone dots that blend by eyePhotos and painted art on dark shirts

Spot color is what most event, team and business shirts use. For photo-style artwork, our post on simulated process printing explains how the dots build up an image.

Step 3: What is a film positive?

Each separated layer is output as a film: the design printed solid black on a clear sheet. One film per ink color. The black areas will block light in the next step, and that blocked area becomes the open part of the stencil where ink passes through.

Step 4: How are screens made?

A screen is a frame with fine polyester mesh stretched across it. The mesh is coated with a light-sensitive emulsion and dried. The film is placed on the screen and exposed to UV light; we use a UV LED exposure unit. Everywhere light hits, the emulsion hardens. Under the black of the film it stays soft and washes out with water, leaving an open stencil of exactly that one color.

This is why screen printing has a setup cost that DTG and DTF do not. Every color needs its own film, its own burned screen and its own station on the press, and that work is the same whether you print 36 shirts or 3,000.

Step 5: What is registration?

Registration means every color lands exactly where it should relative to the others. The screens are locked into the press, one per station, and adjusted until all colors line up. Inks are mixed to your Pantone colors at this stage. Test prints are pulled and checked before the run starts.

We run M&R automatic presses for production runs and an M&R Chameleon manual press for specialty jobs. A one-color print has nothing to register against, so it sets up fastest. Each extra color is one more screen to align.

Step 6: Printing, and why dark shirts need an underbase

On press, the shirt is loaded onto a flat platen. A squeegee pulls ink across the screen and pushes it through the open mesh onto the fabric. The press then moves the shirt to the next station for the next color.

Ink on its own soaks into a dark shirt and looks dull. So on any shirt that is not clearly light, we print a white underbase first: a layer of white under the design, flash cured so the next colors can sit on top without smearing. That underbase is a real extra screen, with its own film and its own pass of ink.

You can see the underbase in the price. These are live prices from our quote engine for a Gildan 5000, per shirt, before sales tax, sizes S to XL. Screen setup is included in the per-shirt price.

Front print, Gildan 500050 shirts, white50 shirts, black100 shirts, white100 shirts, black
1 color$9.52$11.11$7.86$9.05
2 colors$10.56$12.15$8.50$9.68
3 colors$11.60$13.19$9.13$10.32
1 color front and 1 color back$14.18$16.80$11.08$12.90

At 250 shirts, a one-color front is $6.83 on white and $7.77 on black. Sizes 2XL and up carry a supplier upcharge: the 100-piece black one-color shirt is $11.89 in 2XL. The screen printing cost guide walks through every price factor.

The print charge for a one-color design on black is the same as a two-color design on white, because the underbase counts as one more color. If budget is tight, dark ink on a light shirt skips it.

Step 7: Why does curing matter so much?

Plastisol ink does not air dry. It has to be heated until the whole ink layer fuses. Printed shirts run through a conveyor dryer at 320°F to cure fully. Under-cured ink can look perfect leaving the press and then crack or wash out after a few washes. Too much heat can scorch fabric. We check cure temperature on every run rather than trusting the dryer setting alone.

Thick prints and heavy underbases need more heat to cure all the way through, which is one reason a cure check matters more on dark shirts. Our post on why custom shirts crack and peel goes deeper on this.

Step 8: Inspection and packing

After the dryer, every shirt is counted and inspected for print alignment, coverage and garment defects, then folded and sorted by size. Pickup is free at our shop, or the order ships by UPS.

Why is there a 36-piece minimum?

Steps 2 through 5 cost the same for a small run as a big one. Spreading that setup over at least 36 shirts per design keeps the per-shirt price reasonable. Under 36 pieces, DTF (from 12) or DTG (no minimum) is usually the better choice. Our post on screen printing minimum orders explains the math.

Our take

The question we hear most on the shop floor is why the same logo costs more on a black shirt. The answer is the underbase screen from Step 6, and it applies to royal, red and most mid-tone colors, not just black. Our quote calculator adds it automatically for any color that is not clearly light, so the price you see already includes it. The other thing first-time buyers do not expect: we keep your artwork on file, so a reorder of the same design goes faster and matches the first run. For specialty effects like puff or metallic, see specialty inks, and for the softest feel, water-based and discharge.

Ordering from Los Angeles or Orange County

  • Where we are. 14130 Rosecrans Ave, Santa Fe Springs, CA 90670, serving Los Angeles and Orange County.
  • Minimums. DTG none, DTF 12, embroidery 24, screen printing 36 pieces per design.
  • Timing. About 2-3 weeks after art approval. Rush available depending on the schedule. Tell us your date.
  • Contact. Mon-Fri 8am-4pm PT, (562) 407-3800, sales@frenchpresscustom.com.

Price your screen printed shirts now, or read more about our screen printing service.

Frequently asked questions

How does screen printing work, in simple terms?

The design is split into one layer per ink color, each layer becomes a stencil on a mesh screen, and ink is pushed through each screen onto the shirt in turn. The ink is then cured with heat, at 320°F in our conveyor dryer, so it bonds and survives washing.

How many screens does my design need?

One screen per ink color, plus one more for the white underbase on any shirt that is not clearly light. A two-color logo on a black shirt uses three screens.

What is an underbase in screen printing?

It is a layer of white ink printed under the design on dark shirts so the colors on top stay bright. On a 100-piece Gildan 5000 order, a one-color front is $7.86 on white and $9.05 on black, and the underbase accounts for most of that gap.

Why does screen printing need films?

Each film is the black-on-clear image of one ink color. It blocks UV light during exposure, so that area of emulsion stays soft and washes out to form the stencil.

What is registration in screen printing?

Registration is lining up every screen so each color lands in the right spot relative to the others. It is set and checked with test prints before the run starts.

How long does screen printing take?

At French Press Custom, about 2-3 weeks after art approval. Rush is available depending on the schedule; tell us your date when you request a quote.

Is screen printing worth it for small orders?

Screen printing starts at 36 pieces per design with us, and the per-shirt price drops as quantity rises: a one-color front on a white Gildan 5000 is $11.82 at 36 pieces and $7.86 at 100. Below 36, DTF or DTG is usually the better fit.

Ready to price this? Each service page explains the method; each guide shows live per-piece pricing from our engine.

Ordering with us

  • Free digital proof on every order; production starts only after your written approval.
  • Backed by our quality guarantee.
  • Screen Printing: from 36 pieces, ready about 2-3 weeks after art approval
  • Pickup in Santa Fe Springs (Mon-Fri 8am-4pm PT) or shipping nationwide.
  • Rush available depending on the schedule. Tell us your date in your quote request.

Recent work

Recent screen printing from our floor

Instant Pricing

Get your real price in 60 seconds

Configure your order - screen printing, embroidery, DTG, DTF & more - and see live per-piece pricing. No email required to see prices.

Get My Instant Quote

Prefer to talk it through? (562) 407-3800 sales@frenchpresscustom.com

Need Custom Printing?

Get a free quote for your next project. DTG from 1 piece, screen printing from 36, embroidery from 24.

Get a Free Quote
Call (562) 407-3800Open Mon-Fri 8-4Get a Quote